8 steps on How to restore my IMEI?! Android Users, Galaxy S5, S4 Kitkat 4.4.2 Tmobile (SGH-M919)

Applygist is the sole Owner of Sure Tweaks I Need help in  restore my IMEI?! Good question

If you don't have a specific IMEI


backup then there isn't too much you


can do. but read this proceedures they may help out.



The only thing that may work is to


factory reset and wipe your entire


phone then flash your latest official


firmware through Odin.

got the latest firmware from
Samobile,

If your model is not available now.  download it

Galaxy S4 (SGH-M919) T-Mobile
Kitkat 4.4.2
I have used this to write IMEI back
to phone on S3 using QPST.
I've used it to restore Null IMEI on a
S3 .made backup with it on my S5
Active. Download and run software
on pc. EFS portion uses ADB to create
backup on rooted phones. Qualcomm
portion also to make backup or
repair.

Download it here  http://forum.xda-developers.com/
gal...ol-updated-09-06-14-efs-
professional-t1308546

Steps on Rooting your IME Android 1. First, pull battery and write down


complete IMEI number.

2. Go ahead and pull sim card, might be OK but


do it to be on safe side.


3. Boot phone then you need to put  a USB cable in diagnostic mode. On dialer on your  keypad, type in *#0808#. This should


take you to USB settings hidden


menu.

4. Write down what your


settings are. Under USB settings MTP


+ADB should be checked. You need to


select RMNET+DM+MODEM then


select OK. Should return you to


keypad.


5. Next launch EFS Pro and select


Qualcomm NV Tools and connect


phone to pc. Hopefully you already


have your USB drivers installed


Up top at available Com Ports,

6. click refresh till a Samsung mobile USB


serial port with a com number shows


up then select it.

7. Click on connect


and it should ping your phone and


show info.

NOTE : you can leave  SD card in I have left sd card mounted but you


can remove it if you want.

8. To select RMNET+DM+MODEM just tap the


circle next to it then tap ok


 Possible Problems and solutions 

the part where I needed to

connect to my phone didn't work. There's an error that says, "Unable

to send SPC to phone". Any ideas??



I tried using another USB port and


chose it from the dropdown menu in


the program and now, it says,


"Connection lost" and right behind it


I can see "Unable to send SPC to


phone".


Solutions!

Did a proper com port show up in


available?? . On my S5 ative it Shows  com15.


The SPC is a kinda hand shake that


confirms everything OK. I had one S5


example you  terminal and complete wiped the EFS
and you get screwed. It would not connect


to anything afterward.




Try different cable and USB on pc.

You have to be able to get SPC for program to work.


Check phone USB menu again for


changed setting. Got to be RMNET+ DM+M

Diagnostic com port should be a two


digit number. Seen it as high as 26. Mine


is 15. Looks like all drivers not installed.


Yellow triangle. I think I got all my


drivers with Kies but can't remember,


I'm old.


  problem other  face

 I flashed my phone back to stock


without backup lost imei number no


network or data connectivity...I can't


even get into USB hidden mode ;_;


My model : Micromax A092


Share This

0 comments:

Please Make only appropriate comments